Publicité
EN
LOADING THE RACKS
UPPER RACK
Load delicate and light
dishes: glasses, cups, sa-
ucers, low salad bowls.
(loading example for the
upper rack)
CARE AND MAINTENANCE
CLEANING THE FILTER ASSEMBLY
1
A
In case you find foreign objects (such as broken glass, porcelain, bones, fruit seeds
etc.) please remove them carefully.
NEVER REMOVE the wash-cycle pump protection (black detail) (Fig 4).
TROUBLESHOOTING
In case your dishwasher doesn't work properly, check if the problem can be solved by going through the following list. For other errors or issues
please contact authorized After-sales Service which contact details can be found in the warranty booklet. Spare parts will be available for a period
of either up to 7 or up to 10 years, according to the specific Regulation requirements.
PROBLEMS
The dishwasher does not fill
the water.
All LEDs are
blinking rapidly
Dishwasher finishes the cycle
prematurely.
Detergent leaks.
Policies, standard documentation, ordering of spare parts and additional product information can be found by:
• Using QR code on your product.
• Visiting our website docs.indesit.eu and parts-selfservice.europeanappliances.com
• Alternatively, contact our After-sales Service (See phone number in the warranty booklet).
When contacting our After-sales Service, please state the codes provided on your product's identification plate.
The model information can be retrieved using the QR-Code reported in the energy label.
The label also includes the model identifier that can be used to consult the portal of the registry at https://eprel.ec.europa.eu.
2
FOLDABLE
FLAPS WITH
ADJUSTABLE
POSITION
2
3
B
C
A
POSSIBLE CAUSES
No water in the water supply or the tap is closed. Make sure there is water in the water supply or the tap running.
The inlet hose is bent.
The sieve in the water inlet hose is clogged; it is
necessary to clean it
Drain hose positioned too low or siphoning
into home sewage system.
Air in water supply.
Depends on the liquid detergent used and
can be emphasized in case of delay option is
activated.
LOWER RACK
For pots, lids, plates,
salad bowls, cutlery
etc. Large plates and
lids should ideally be
placed at the sides to
avoid
interferences
with the spray arm.
(loading example for
the lower rack)
More information in the Daily Reference Guide on website.
CLEANING THE SPRAY ARMS
4
To remove the upper spray arm,
turn the plastic locking ring in
a clockwise direction.
Please scan the QR code on your product in order to have more detailed information.
SOLUTIONS
Make sure the inlet hose is not bent (see INSTALLATION) reprogram
the dishwasher and reboot.
After having carried out the verification and cleaning, turn off
and turn on the dishwasher and restart a new program.
Check if end of drain hose is placed at correct height (see INSTALLA-
TION).Check for siphoning into home sewage system, install air admit-
tance valve if necessary.
Check water supply for leaks or other issues letting air inside.
Small leaks will not cause machine malfunction and can be avoided
by changing liquid detergent type or using tablets.
Quick Guide
CAPACITY: 10 standard place-settings
CUTLERY BASKET
The basket is equipped with
top grilles for improved cut-
lery arrangement. The cut-
lery basket should be posi-
tioned only at the front of
the lower rack.
Knives and other utensils
with sharp edges must be
placed in the cutlery basket with the points
facing downwards or they must be posi-
tioned horizontally in the tip-up compart-
ments on the upper rack.
The lower spray arm may be
removed by pulling it upwards.
:
IEC 436
Publicité
