Publicité
INSTALLATION
1.
Please make sure the fan is installed 2.3m higher than the ground.
2.
Open the box and take out the main body, grill, fan blade, etc. For ideal storage for the future, please keep
the box in a safe place.
3.
Take out the fan blade nut 3 in clockwise direction and the grill nut 5 in anti-dock-wise direction. Put the
rear grill 6 into the motor axis 7 and lock it with the grill nut 5 .
4.
Put the fan blade 4 in to the motor axis 7 and lock it with the fan blade nut 3 . Tate out the front grill 1
and fit it with the rear grill 6 , then lock with screw 2 .
Fix on the wall
Fix the wall-mounted iron plate 10 on wall by two nails 9 and two plastic screws 11 , then hang the fan
body 8 on it.
EN
9
Publicité
