Publicité
All manuals and user guides at all-guides.com
MTS Broadcast / TV Stereo System
®
Equipped with
-TV Noise
Reduction for true MTS
®
reproduction.
-TV Noise
Reduction is required for good
stereo separation and audio fidelity.
®
is a registered trademark, and
is licensed by
®
Technology
Licensing.
< Example >
Press AUDIO
DF2702-K(P23 MTS).p65
Receivable Broadcast Types
The following are possible audio broadcast types and
on-screen displays. The signal being received is indicated
with an "
" mark while the selected audio mode is indicated
with an arrow. To change the audio mode for these
broadcasts, see the "Select Audio Mode for TV Viewing"
section (below.)
Press DISPLAY to display
the broadcast signal being received.
ABC
STOP
1 2 : 0 0AM
0 : 0 0 : 0 0
SP
STEREO
SAP
MONO
ABC
STOP
1 2 : 0 0AM
0 : 0 0 : 0 0
STEREO
SP
SAP
MONO
STOP
1 2 : 0 0AM
ABC
0 : 0 0 : 0 0
SP
STEREO
SAP
MONO
STOP
1 2 : 0 0AM
ABC
0 : 0 0 : 0 0
STEREO
SP
SAP
MONO
Audio Mode for TV Viewing
Press AUDIO to select the desired audio mode
as described above.
(Arrow shows selection.)
• Each press of AUDIO will change the audio mode as shown
below.
• "SAP" is selected with first press of AUDIO.
STOP
1 2 : 0 0AM
ABC
0 : 0 0 : 0 0
STEREO
SP
SAP
STOP
1 2 : 0 0AM
MONO
STEREO
SAP
MONO
Press AUDIO
Press AUDIO
23
MTS Stereo and SAP broadcast
Multi-channel Television Sound Stereo
(main language) and Secondary Audio
Program (sub language) broadcasts are
being received simultaneously.
Select the STEREO or SAP audio mode.
MTS Stereo broadcast
Multi-channel Television Sound Stereo
broadcast. Select STEREO audio mode.
• If stereo broadcast is weak and the
display flickers, select MONO audio
mode for possible improvement.
SAP broadcast
Secondary Audio Program
(sub language).
Select SAP audio mode for the sub
language.
MONO broadcast
Normal monaural sound broadcast.
ABC
0 : 0 0 : 0 0
SP
ABC
STOP
1 2 : 0 0AM
0 : 0 0 : 0 0
SP
STEREO
SAP
MONO
2002/03/08, 18:28
23
Publicité
