Publicité
All manuals and user guides at all-guides.com
* Important: If a remote control button does not work when pressed, press the
and try the button again.
Manual Clock Set
If AUTO CLOCK SET was incomplete, manually
set the clock as follows.
1
Press ACTION on the Remote to
display SET CLOCK Menu screen.
SET CLOCK
SELE CT MONTH
SELECT :
SET
: SET
END
: ACT I ON
2
Press
to select the month and
press SET to set. In the same
manner, select and set the date,
year, time, and DST. (Daylight
Saving Time)
3
Press ACTION twice to start
CLOCK and exit.
Note to CABLE system installer:
This reminder is provided to call the CABLE (Cable TV) System
Installers attention to Article 820-40 of the NEC that provides
guidelines for proper grounding and, in particular, specifies that
the cable ground shall be connected to the grounding system of
the building, as close to the point of cable entry as practical.
DF2702-K(P14-15)Initial setup.p65
Reset all unit Memory Functions
When moving unit to a new location, or if a
mistake was made in the Initial Setup section.
• Make sure a tape is not inserted in the unit.
DST : ON
1
Turn the unit
Power on.
2
Press and hold both PLAY and FF
on the unit for more than 5
seconds.
• The power will shut off.
• Please ignore "NO CASSETTE" warning.
3
Perform "Initial Setup" on the 14.
15
button on the remote
15
2002/03/08, 18:27
Publicité
