ENGLISH
1. GENERAL CHARACTERISTICS
Drilling machine
Spindle rotation
Max. drilling capacity *
Max. drilling thickness *
Speed without load
Dimensions
Weight
Acoustic noise
(1)
Vibrations
(2)
Combustion engine
Displacement
Power (SAE J1349)
Fuel tank capacity
Fuel
Clutch
Starting
Spark plug
Fuel consumption
Emissions
* Depending on the type of wood, it is also possible to drill larger diameters and tickness , for specific applica-
tions, please contact CEMBRE.
1) Directive 2006/42/EC, annexe 1, point 1.7.4.2 letter u:
L
: A-weighted continuous acoustic pressure level in the work place.
pA
L
: Acoustic power level emitted by the machine.
WA
(2)
The vibration emission during actual use of the tool can differ from the declared total value depending on the
ways in which the tool is used and of the need to identify safety measures to protect the operator that are based
on an estimation of exposure in the actual conditions of use. Estimation of exposure is performed taking account
of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in
addition to the trigger time.
1.1) Centrifugal clutch assists: with start up and auger positioning at low speed. If the engine
stalls during the drilling operation, the machine may be restarted with the auger remaining
in the sleeper.
1.2) Emergency lever for quick auger release: if necessary, this lever allows immediate release
of the auger from the machine, which can then be removed from the working area.
(See Fig. A)
SD-15PR-ECO
type
mm (inch)
mm (inch)
rpm
mm
kg (lbs)
dB
m/s
2
type
2-stroke, horizontal shaft, single cylinder
cm
3
kW
lt
2 % (1:50) petrol mixture (Ref. to § 7)
centrifugal with automatic intervention
by rope pull with automatic rewinding
430 g/kW.hr - 320 g/hp.hr / 8500 rpm
"Phase V" European regulation 2016/1628
and EPA regulation for engine in class V
SD-15P-ECO
25 (1)
200 (7-7/8)
850
Ref. to pag. 58 - 59
21,2 (46.6)
L
= 97,9 (A) L
= 106,5 (A)
pA
WA
7,06
KAWASAKI TJ053E
53,2
2.0 / 8500 rpm
1,1
NGK BPMR8Y
4