Publicité
5 - Connect the lights to the power line (Part E). Each tree section has
a light string cord with a red ribbon that will be convenient for you to
find them. Then plug each cord into a receptacle on the power line.
Note that the male and female connectors will only connect in one
direction. After connection, twist closed each connector nut securely.
For a quick connection tree, the cord and power line are already
connected, you just need to connect Part A, Part B and Part C, and
plug the adapter into the power supply then the lights will turn on.
5FT,6FT TREE
Tips: The controller is only for multi-lighting modes LED lights,
like 11 lighting modes,9 lighting modes and APP controlled LED
lights. You can use it to control lights.
The tree is now ready to be decorated. Ensure that the decorations
are uniformly distributed on the tree.
10
6FT,7FT,8FT TREE
11 lighting modes LED lights
There are nine functions that occur in the following order with memory
function:
1. A STEADY ON
2. A QUICK FLASH
3. A SLOW FLASH
4. B STEADY ON
5. B QUICK FLASH
6. B SLOW FLASH
7. A/B COLOUR CHANGING QUICK FLASH
8. A/B COLOUR CHANGING SLOW FLASH
9. A/B COLOUR CHANGING 5 TIMES
10. A/B COLOUR CHANGING SLOW FADE
11. A/B STEADY ON
9 lighting modes LED lights
There are nine functions occur in the following order with memory
function:
1. COMBINATION
2. LED1 STEADY ON
3. LED2 STEADY ON
4. LED1 SLO GLO
5. LED2 SLO-GLO
6. LED1 & LED2 SEQUENTIAL
7. LED1 & LED2 TWINKLE
8. LED1 & LED2 SLOW FADE
9. SLO-GLO
11
Publicité
