Publicité
Assembly instructions
1 - Assemble the base (as indicated on the
figure 1 ) on a stable surface,
indicated on the cardboard packaging.
Unfold the base and insert the screw as
indicated in Figure 1b.
2 - Remove the plastic caps and pearl cotton on the end of each part.
If they were broken or missing during transportation, please don't
worry, they are just for protecting the pole.
Insert the trunk in the base as indicated. When the trunk consists of
more than one part, begin by inserting into the base (Part D) the part
of the trunk carrying the longest branches (Part C), as successively to
assemble the other parts of the trunk ( Part B ), by ending with the
smaller branches (Part A) at the top of the tree.
5FT,6FT TREE
5FT,6FT,7FT,8FT TREE
08
such as
Figure 1b
3 - Unfold one by one the branches beginning by the lower branches.
Each branch tip must be shaped to its proper position to give the tree
a natural look. This is done by gently grasping the left and right wing
tips and spreading them away from the center tip. For fast shaped
tree, it features 100% memory wire construction with interlocking
sections that spring into fullness.
During the shaping, the snow powder and leaves may drop down.
4 - Make final adjustments and trimming to the tree.
09
Publicité
