Publicité
5. Assembling the Head of Cat
Hang the 7-shaped hooks at the bottom of the Head of Cat (A) onto
the top metal frame of the Body of Cat (B) and fasten together at
the connecting loops with the Zip Tie (J).
A
6. Assembling the Ears
Insert the connecting rods of the Left and Right Ears (H&G) into the
connecting holes at the top of the Head of Cat (A).
G
10
B
H
A
7. Assembling the Tail
Insert the connecting rod of the Tail (I) into the connecting hole at
the rear of the Body of Cat (B).
B
8. Assembling the Ground Stakes
Insert three Ground Stakes (K) over the bottom metal loops of the
three Legs (D&E&F) then into the ground firmly.
K
9. Connecting the wires
Insert all the plugs connected to the Wire Controller (M) into all the
sockets then tighten the plastic nuts.
I
K
K
11
Publicité
