Publicité
6
HEIGHT ADJUSTMENT
1. Always remove stilts before adjusting the height.
2. Remove Height Adjustment Knobs and pull Upper Legs to the required length.
3. Align the Knob holes, install the Adjustment Knobs and fasten securely. Make sure washers are on before tightening the Knobs.
4. Check that front and back legs – and both stilts – are adjusted to the same height.
CAUTION: Check to make sure Adjustment Knob bolts are tight before each use.
CLEANING AND INSPECTION
WARNING: Inspect stilts daily and replace any worn or damaged components. Check for excess wear and verify
that all fasteners are tight.
1. Clean Foot Plates and Floor Soles before each use. Replace your Floor Soles regularly to maintain maximum traction.
NOTE: Make sure to use only water for the cleanup.
2. Clean and lubricate moving parts daily with a Silicone Spray. Be careful not to get lubricant on your Floor Soles or Foot Plates
that could cause you to lose traction or slip.
STORAGE
Store stilts in a dry location where they will not be bent or damaged.
Publicité
