Publicité
2. Charging Status Indicator: Once the adapter is
plugged into the socket and you've confirmed the
charging mode, the indicator will light up and remain
still, otherwise it remains off.
· Please unplug the adapter before conducting the battery tests
and make sure the clamps are properly connected to the battery
terminals.
3. Bluetooth Connection Status Indicator: If the
TB6000Pro is under standalone mode and not paired
to any phones, the Bluetooth indicator will keep
flashing. Once it is paired, the indicator remains still.
4. Charging Steps Indicator: It shows you exactly which
step you are in among the 9 charging steps.
5. Real-time Charging Voltage and Current: It presents
you with the real-time charging current and voltage.
The parameter refreshes every 2 seconds .
When the following errors occur, it will display the
corresponding error code:
Er1: Short circuit or reverse polarity
Er2: Overtemperature
Er3: Charging timeout
Er4: Battery is damaged, please switch to 12V Supply
mode to attempt to recover the battery.
Er5: Wrong mode, please select 12V charging mode.
6. Battery Charging Progress
7. Mode Button: Press the Mode button to toggle among
charging modes. After a charging mode is selected,
charging will start automatically within 3 seconds.
Note: The charger will resume charging using the
previous mode when it is powered on again.
How to Download and Connect the TB6000Pro to
Your Phone?
10
Publicité
