5.2 Use
Instructions for use :
-
Before using your appliance remove all protective parts.
-
Remove all external protective parts. If glue marks still remaining remove them with appropriated
solvent.
-
Place it on a flat, stable, heat-resistant work surface
-
Never place the oven on a flammable surface. The appropriated site for the installation of the unit
is a dry and well ventilated position; we recommend keeping a distance of 15cm between walls
and other appliances.
-
Never charge other appliance or object on your oven.
-
This oven is not dedicated to be built-in.
-
Do not install the appliance near open fireplaces or all hot sources.
-
Do not install the appliance in a wet place or near humid sources.
-
The plug must be protected by a circuit breaker of 16 A. Connect the appliance directly to a wall
plug socket. The use of adaptors, multiple sockets and/or extensions is not recommended.
-
Before any use the appliance must be cleaned.
-
Prior the first use, heat the appliance without any food. Plug the appliance and adjust your
thermostat on 200°, duration 30 minutes. Place the food only when the oven cools down. Smoke
and bad smells can occur.
-
The heater indicator turns on as soon as a button is touched. When the temperature control knob
is on, the indicator lights on and off when the good temperature is reached. When the cooking time
control is on the light goes on and ventilators start functioning.
-
Put your products on the shelves. When using different floors use grids in order to allow heat
diffuses regularly.
-
The appliance turns off automatically when the cooking period is reached.
6. Cleaning and maintenance
6.1 Safety instructions
- Before servicing (clean, maintenance, repair) unplug the appliance
- Caustic detergents, sodium bicarbonate are forbidden for the cleaning of your appliance.
- Check regularly the power cord.
- Do no immerse the appliance in water or other liquid.
Warning !
Your appliance cannot be clean by water jet (neither water jet under pressure)
Version 270114
20