Publicité
3.4
Unpacking
Carefully remove the machine from the shipping case. Preserve all paperwork for future
reference. If damage has occurred from shipment a claim must be filed with the carrier
immediately; preserve the shipping carton for inspection by the carrier. If you are required
to communicate with your dealer, be sure to include serial numbers for quick identification.
3.5
Mounting
Rubber feet are attached to the product. Rubber feet are excellent for applications
involving a semi-flexible surface such as a bench top; they help to isolate noise and
eliminate creeping. However, the horizontal position of the motor shaft should be
preferred.
3.6
Installation location
The suction system should be located preferably in a clean, dry and well ventilated area.
Please be sure not to block the ventilation ports located on the motor housing. The unit
should be placed where the surrounding temperature remains between 10
o
o
(50
F and 104
F). Always check to insure the location chosen is protected from direct or
indirect moisture contact.
Place suction outlet valve higher position than drainage to prevent backflow problem.
ATTENTION:
The maximum allowed distance between the suction and the dental chair is
6m for RAIN1, RAIN1C, RAIN1CT and 8m for RAIN2.
Hose connection
Diagram of Suction tubing of RAIN1/RAIN1C/RAIN1CT
Diagram of Suction Tubing of RAIN2
o
o
C and 40
C
24
Publicité
