Arris DCX525 Guide De Démarrage Rapide page 2

SETTING UP YOUR DCX525
IMPORTANT! Read the enclosed Safety Instructions before you begin.
1. Connect your cable service.
Connect the coaxial cable from your wall outlet to the Cable In port on the DCX525.
2. Connect your TV.
If you have a high-definition TV, use the HDMI connector.
If you have a standard-definition TV, use the RF OUT connector.
3. Plug in the DCX525.
Connect the power cord to the DCX525, then plug it into an unswitched electrical outlet.
4. Turn on the TV and select the input.
If you have an HDTV, use the remote control for your TV to select the HDMI port you used to connect
the DCX525.
If you have an SDTV, tune your TV to Channel 3. If your screen remains black, switch your TV to CH 4.
5. Enjoy your new services!
For more detailed instructions on setup and configuration, please refer to the DCX525 User Guide
available online at http://www.arris.com.
DCX525 Quick Start Guide 1