Publicité
3. INSTALL THE BLUETOOTH IRRIGATION TIMER
1) Turn off the garden faucet.
2) Wrap Teflon Tape around the faucet threads.
3) Screw the timer to the garden faucet and make the display as
vertical as possible to the ground to prevent rainwater from
accumulating and leaking into the interior.
4) Wrap Teflon Tape around the threads of the timer outlets.
5) Screw the garden hoses to the timer outlets.
6) Turn on the faucet after programming the timer.
Tips: If the connection between the timer and the faucet or hose is not
tight or leaking, wrap more Teflon Tape(thread seal tape) to make them
tight.
Warning: Please make sure the smart phone is near the Bluetooth
water timer when connecting orsetting the watering plan. The best
range for connection and operation is within 60 meters in the open
area. If there are walls iron gates or bushes blocking, please shorten the
distance betweenthem to better receive the signal.
Please install the filter correctly to achieve a better filtering effect.
Less than 100 feets
(No bushes, walls blocking)
Please install the filter properly
and keep it clean as follows.
- 06 -
Inlet
Outlet
Publicité
