Publicité
RESET THE DEVICE
How to reset the Bluetooth timer?
Step 1. Remove all batteries from the battery compartment.
Step 2. After 10 seconds,insert 3 fresh AAA(1.5V）alkaline batteries
into the battery compartment of the timer.
Step 3. Press and hold the button on the timer without releasing the
button until the blue LED indicator quickly flashes (2 times per second),
then the Bluetooth timer is restored to pair mode.
TROUBLE SHOOTING
Issue
Can't turn on /off
the valve
Timer won't
connect
Possible Cause
1) Low battery
2) Impurities in water
inlet
3) Unstable network or
delayed response
1) Mobile phone
Bluetooth is not
kept open.
2) The phone is
connected to the
Bluetooth timer at
a long distance
- 15 -
Advice
1) Replace fresh batteries .
2) Regularly clean the filter
port of impurities to
avoid disruptions in use.
3) Wait a while and try
again.
1) Check whether the cell
phone Bluetooth is open
state.
2) Connect the Bluetooth
timer close to the APP
phone
3) Repair the timer: Press
the button until the
white light flashes
rapidly. (Or remove the
device then reconnect)
Publicité
