Publicité
4. TEST BEFORE USE
The test is over, everything is normal, please keep the faucet fully
turned on!
Note: When testing, please keep away from the water outlet of the
timer to avoid being splashed and wet.
Explanation: The valve is activated usually, but due to various
factors such as external force or the environment during storage
and transportation, the valve may be protectively closed. In this
case, you need to activate the timer manually.
Congratulations, you have completed the connection
and installation of the Bluetooth Irrigation Timer
Please test whether the internal valve of your water
timer is normal before using it.
1) Keep the faucet turned off.
2) Press the button of the timer , with a "click"
sound, the valve inside the timer opens for manual
watering. After a few seconds,press the button
again, the "click" will sound again, and the valve
will close.
3) Turn on the faucet a little bit, press the button of
the timer to check if the water flow out or shut off
as expected. If yes, the valve is normall, please use
it with confidence! If not, please repeat the above
steps several times.
- 07 -
Publicité
