Publicité
C
Cleaning and maintenance
Cleaning and maintenance
Removing the filter
We recommend that you check and clean the filter regularly, at
least two or three times a year.
Especially:
• If the appliance is not draining properly or if it fails to perform
spin cycles.
• If the pump is blocked by a foreign body (e.g. buttons coins or
safety pins).
IMPORTANT: Ensure that the water has cooled before
draining the appliance.
1. Stop the appliance and unplug it.
2. Depending on the model, remove the plinth by holding it tightly
on both sides, pushing it downward and tilting it to the front.
Or, push down on the tabs provided on both the sides and
remove it.
3. Place a container beneath it.
4. Open the filter but do not remove it completely. Slowly turn
the filter counterclockwise until the water begins to drain out.
23
EN
Publicité
