Publicité
EN
RF Exposure Warning for North America and Australia
Warning! This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with a minimum distance of 20 cm between the radiator and the user. This
transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Connection of the control signal: DMX line
•
The product has XLR sockets for DMX input and output.
•
Notice: This control circuit is isolated and belongs to the Class 2 data port.
•
The control circuit has a cumulative leakage current of less than 3.5 mA.
What is Included
•
Ovation F-415FC-2
•
Seetronic Powerkon IP65 power cable
AC Power
This product has an auto-ranging power supply that can work with an input voltage range of 100–240 VAC, 50/60 Hz.
AC Plug
Connection
AC Live
AC Neutral
AC Ground
To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely
disconnect the product from power via breaker or by unplugging it.
Power Linking
It is possible to power link Ovation F-415FC products. See the table below for the current draw at each voltage and
frequency:
Current Draw
Never exceed 12 A on a single circuit. Power-linking cables can be purchased separately.
Mounting
Before mounting this product, read the
weight of the product. For the Chauvet line of mounting clamps, go to http://trusst.com/productcategory/truss-clamps.
Mounting Diagram
Mounting clamp
Overhead mounting
2
QUICK REFERENCE GUIDE
Wire (U.S.)
Black
White
Green/Yellow
100 V, 60 Hz
120 V, 60 Hz
1.351 A
1.101 A
Safety
Notes. Make sure the mounting clamps are capable of supporting the
•
Gel frame (6.25 in / 158.75 mm accessories)
•
Quick Reference Guide
Wire (Europe)
Brown
Blue
Green/Yellow
208 V, 60 Hz
0.638 A
Safety cable
Screw Color
Yellow/Brass
Silver
Green
230 V, 50 Hz
240 V, 50 Hz
0.585 A
Surface mounting
Ovation F-415FC QRG Rev. 1
0.569 A
Publicité
