Publicité
21. Car seat assembly
A car seat (J) and a set of adapters (K) are included. To assemble the car seat,
remove the cradle or seat from the frame. Align the car seat adapters with the
frame and press down. Listen for a 'click' to indicate that the seat is correctly
assembled.
Place the car seat on the adapters. Push down and the car seat is correctly
assembled when you hear a 'click'. Lift the car seat by the handle to check that
it is properly fastened.
You can also attach the adapters to the car seat first and then attach the car
seat to the frame.
WARNING: never attach the car seat in the forward position.
J
K
Publicité
