Publicité
Cancelling the setting
Press the
Clock button. Press the - button until zero is
0
shown on the display. Switch off the function selector.
Setting the cooking time if the clock is hidden
Press the
Clock button twice and make your settings as
0
described in point 4.
The oven should switch on and off
automatically
Do not allow food to stand for too long in the oven. Meat and
fish spoils easily if not kept chilled.
Example in the picture: Top/bottom heating
10:45. The meal takes 45 minutes to cook and should be ready
at 12:45.
Use the function selector to select the required type of
1.
heating.
Use the temperature selector to set the temperature or the
2.
grill setting.
Press the
clock button.
0
3.
The
Cooking time symbol flashes.
x
Use the + or - button to set the cooking time.
4.
Press the
0
Clock button repeatedly until the
5.
symbol flashes.
You can see in the display when the meal will be ready.
Setting the time
Following a power cut or when the oven is used for the first
time, the
0
symbol and three zeros flash in the display. Set the
time. The function selector must be switched off.
Setting the timer.
You can use the timer as a normal kitchen timer. It operates
independently of the oven. The timer has a specific signal. This
informs you when the timer or cooking time has elapsed. You
can also set the timer if the childproof lock is active.
Setting procedure
Press the
timer button.
S
1.
The
symbol flashes.
S
Use the + or - buttons to set the timer time.
2.
Default value for button + = 10 minutes
Default value for button - = 5 minutes
The timer starts after a few seconds. The
display. The time counts down in the display.
The time has elapsed
A signal sounds. Press the
goes out.
48
%
, 200 °C. It is
y
End time
symbol is lit in the
S
S
timer button. The timer display
Use the + button to set a later end time.
6.
The setting is adopted after a few seconds.
The display shows the end time until the oven starts
operating.
The cooking time has elapsed
A signal sounds. The oven switches off. Press the
twice and switch off the function selector.
Note: You can make changes as long as the symbol is
flashing. When the symbol lights up, the setting has been
adopted.
Setting procedure
Press the
0
clock button.
1.
12.00 appears and the
Use the + and - buttons to set the time.
2.
After a few seconds, the time is accepted. The
goes out.
Changing from summer to winter time.
Press the
0
clock button twice and use the + or - buttons to
change the time.
Changing the alarm time
Press the
timer button. Use the + or - buttons to change the
S
time.
Delete the setting
Press the
timer button. Press the - button until zeros appear
S
in the display.
The timer and the cooking time run down in synchronisation
The symbols are lit. The timer time counts down in the display.
Check the remaining
cooking time,
x
of day:
Press the
clock button repeatedly until the relevant symbol
0
is displayed.
The requested value appears in the display for several
seconds.
0
0
symbol flashes.
0
end time or
y
button
symbol
time
0
Publicité
