LITE
EN
®
!
Caution: The cable to be installed must be 6 mm in diameter, the (+) cable should be protected with a
30A fuse.
Important: Due to the complex system of electronic control for the equipment, the power outlet should
be made directly to the vehicle battery or an authorised point, not any other point serving other vehicle
accessories, taking precaution not to reverse the polarity when connecting.
Important: For the start up consult the user manual.
Vehicles
(WDB chassis...)
14
Insert console in front and secure it with (4) 6 /
100x16 screws with washer, screwing onto the
hexagon spacers.
14
14
14
28