Beurer BF 405 Signature Line Mode D'emploi page 10

• Never weld or solder on batteries.
• Never mix batteries of di erent manufacturers, capacities (new
and used), size and type within a device.
• Risk of explosion! Failure to comply with the points mentioned
above can result in personal injury, overheating, leakage, vent-
ing, breakage, explosion or fire.
• If a battery has leaked, put on protective gloves and clean the
battery compartment with a dry cloth.
• If your skin or eyes come into contact with battery fluid, rinse the
a ected areas with water and seek medical assistance.
• Choking hazard! Keep batteries out of the reach of children.
Seek medical attention immediately if swallowed.
• Never allow children to replace batteries without adult supervi-
sion.
• Store batteries away from metal objects in a well-ventilated, dry
and cool place.
• Never expose batteries to direct sunlight or rain.
• Remove batteries from the device if it is not going to be used for
a long period of time.
• Dispose of discharged batteries immediately and properly. Never
dispose of batteries in fire.
• When disposing of batteries, keep batteries with di erent elec-
trochemical systems separate.
3. SIGNS AND SYMBOLS
The following symbols are used on the device, in these instructions
for use, on the packaging and on the type plate for the device:
 WARNING
Indicates a potentially impending danger. If it is not avoided,
death or serious injury will occur.
Product information
Note on important information
Observe the instructions for use
The electronic device must not be disposed of with
household waste
Do not dispose of batteries containing hazardous
substances with household waste
Marking to identify the packaging material.
B A = Material code, B = Material number:
1-7 = Plastics, 20-22 = Paper and cardboard
A
Separate the packaging elements and dispose of
them in accordance with local regulations.
CE labelling
This product satisfies the requirements of the appli-
cable European and national directives.
The products demonstrably meet the requirements
of the Technical Regulations of the EAEU.
United Kingdom Conformity Assessed Mark
The device may not be used by people with medical
implants (e.g. pacemakers), as this may a ect their
functionality.
Manufacturer
Separate the product and packaging elements
and dispose of them in accordance with local
regulations.
Importer symbol
Danger of slipping: do not step on the scale with wet
feet.
Danger of tipping: position yourself in the centre of
the weighing surface.
Place the scale on an even surface. No carpet.
4. DEVICE DESCRIPTION
The corresponding drawings are shown on page 3.
1 Display
2
button
3 SET button
4
button
5 Electrodes
6 Battery compartment
7 UNIT button
8 Measurements
5. USAGE
5.1 Prerequisites for taking measurements
correctly
• Place the scale on a level and stable surface (see Figure
• Wherever possible, weigh yourself at the same time every day
(ideally in the morning), after having been to the toilet, on an
empty stomach and without clothing.
• To determine your body fat, always stand barefoot on the elec-
trodes on the scale.
5
• Stand upright and still throughout, from the weight measurement
through to the body fat measurement. Ensure that your weight
is evenly distributed.
10
9 Measurement unit
10 Classification (measured
value = high)
11 Classification (measured
value = normal)
12 Classification (measured
value = low)
13 Body data
14 Measurement data transfer
15 Scale connected to Blue-
®
tooth
A
).