Scheduling your heating
You can program your heating by creating a schedule of "events", where the heater switches on or off. These events can be
temporary, like setting a timer, or they can be recurring, so the heater switches on at the same time every week. You can set an
unlimited number of events, switching the heater on and off across the week.
For every event, you must set a start time. Then, choose whether you want it to repeat. Select "Only Once" if you just want to set a
timer for now. If you want the event to repeat, select which days you want it to occur. Finally, choose whether you want the heater
to switch on or off. Make sure you confirm your settings at every stage and press save to keep the event.
Each event will appear in your schedule. You can activate and de-activate events using the toggle. You can also delete events by
swiping left and tapping Delete.
The heater will beep when it begins a new heating event. Note, if you change the heater's setting during an event – i.e. turning it
on when it is scheduled to be off – the heater will remain as it is until the next scheduled event.
Smart features
1. Voice integration
Smart Life is compatible with both Amazon Alexa and Google Home.
To connect, first download the SmartLife skill onto your Alexa or Google home app. You can then link your Alexa or
Google home app with your SmartLife app. Depending on your device, your voice control app may discover your
devices automatically, or you may need to prompt it to do so.
Once the SmartLife skill is enabled and linked with your SmartLife app, you should get notifications whenever you
add a new heater or scenario. The notification will tell you what to say to control the heater or scenario by voice.
You can find quick guides to connecting the app to both Google Home and Alexa in the FAQ section.
2.
Example commands:
OK Google turn on heater
Alexa, switch off heater
OK Google, switch heater to 25 degrees
Alexa, set heater to 9 degrees
47
EN