Publicité
NOTES
Prior to drilling the wall, ensure there are no cables or pipes within the wall and ensure that the mounting screws are fixed firmly to
guarantee that the heater is safely mounted to the wall.
Control Panel
Temperature
compensation
1. On/off button
Switch the unit on using the main power switch.
2. Temperature setting:
Use the UP and DOWN buttons to change the desired temperature, the temperature adjustment range is 5-50 degrees.
3. Timer setting:
Press the timer button in order to set the timer and then press the timer button again to choose the length of time you want the
heater to heat before automatically shutting off (1 – 24 hours).
4. Child lock:
Long press the on/off button to lock the heater and long press the on/off button again if you want to unlock the heater. The lock
icon will appear on the display when the heater is locked and will disappear again once the heater is unlocked
5. Temperature compensation:
Long press the time button to turn on the temperature compensation setting. You can set the temperature compensation range
from 9 to -9 and adjust this by using the temperature up and down button. When the heater is in the temperature compensation
setting, the temperature compensation icon will appear on the display. The temperature compensation setting can be used to
display a more realistic temperature of the entire room because the temperature detected by the temperature sensor is the
temperature around the heater, which is higher than the average temperature of the entire room. For example, the temperature
sensor has a temperature of 25, while the room temperature three meters away is actually 22 degrees. To calibrate this
temperature, this setting allows you to set a -3 degree temperature compensation. That is to say, although the sensor temperature
is 25 degrees, it displays 22 degrees, which will more realistically reflect the temperature of the entire room.
6. Sound:
Long press the temperature down button, the program enters the silent mode and on the display the silent icon will appear. If you
would like to turn off the silent mode, long press the temperature down button again. When the heater is in the silent mode, the
buttons on the display screen will make no noise when you push the buttons.
7. Window function
Long press the temperature up button to activate the open window function. Once this function is activated, the open window
function icon will appear on the display. To turn off the open window function, long press the add button again. The open window
function ensures that when the temperature in the room drops 4 degrees in 30 minutes, the open window function icon will start
Mute
Lock indicator
Temp Up
Heating
icon
WiFi indicator
Open window
detection
Remote control
43
EN
Temp Down
Timer
On/off
button
Publicité
