Publicité
1. Put the product upside down on soft cotton cloth or carpet.
2. Fix the feet to the rear cover of the heater using the screws provided. Line up the holes in the rear cover with the holes in feet, put
the screws through the holes and tighten with a screwdriver.
Wall mounted installation
1. The kit supplied in the package is designed for mounting on a solid wall. If mounted onto other types of walls, you will need
appropriate fixings (not supplied). Please make sure the wall is safe to mount. We highly recommend to have the panel installed by a
qualified electrician. The heater must be at least 50 cm removed from all objects, walls, etc.; the distance to the floor must be at
least 10 cm.
2. Mark the wall according to the dimensions given below for the heater models you purchased (350W or 520W), drill the wall and
insert the plastic wall anchors into the holes and tighten the screws. Please note the screws expose at least 0.8cm.
Distance
350W
A
256 mm
B
256 mm
C
255 mm
520W
256 mm
256 mm
376 mm
42
EN
Publicité
