Publicité
Addressing
Each module requires a numeric address for identification
purposes. This is set by using DIP switches 1 to 7.
Caution:
Never turn DIP switch 8 ON. Turning this switch ON
may damage or destroy the module.
The module uses four addresses: The configured address plus
the next three numbers (for example, 201, 202, and 203 if the
configured address is 200).
By switching DIP switches 1 to 7 to the ON position, the
module can be addressed from 128 to 252.
For further information, refer to the address tables at the end of
this document.
Status LED
The Status LED is lit constantly during alarm.
Maintenance and testing
Basic maintenance consists of a yearly inspection. Do not
modify internal wiring or circuitry.
To test the module:
1.
Remove a detector head from its base or activate a
manual call point connected to the module detection zone.
2.
If the status LED and control panel fail to indicate the test
all connections should be checked and the module
address verified.
Specifications
Operating voltage
Loop current consumption
at 24 VDC (standby)
at 35 VDC (standby)
Alarm
Current consumption
24 VDC aux. supply (standby)*
24 VDC aux. supply (alarm)*
End-of-line resistor
Operating temperature
Storage temperature
Relative humidity
Weight
Dimensions
* Excluding loop devices
2 / 16
22 to 38 VDC
110 µA
135 µA
<5.0 mA
200 µA
<360 mA
4.7 kΩ
−10 to +50ºC
−10 to +70ºC
10 to 95% (noncondensing)
835 g
223 × 173 × 80 mm
Regulatory information
This section provides a summary on the declared performance
according to the Construction Products Regulation
(EU) 305/2011 and Delegated Regulations (EU) 157/2014 and
(EU) 574/2014.
For detailed information, see the product Declaration of
Performance (available at firesecurityproducts.com).
Conformity
Notified/Approved body
0370
Declaration of
360-4109-0699
Performance number
Year of first CE marking
08
Product identification
KAL714C
Intended use
See the product Declaration of Performance
Declared performance
See the product Declaration of Performance
Manufacturer
Carrier Manufacturing Poland Spółka Z o.o.
Ul. Kolejowa 24, 39-100 Ropczyce, Poland.
Authorized EU manufacturing
representative: Carrier Fire & Security B.V.,
Kelvinstraat 7, 6003 DH Weert,
Netherlands.
2012/19/EU (WEEE Directive): Products
marked with this symbol cannot be
disposed of as unsorted municipal waste in
the European Union. For proper recycling,
return this product to your local supplier
upon the purchase of equivalent new
equipment, or dispose of it at designated
collection points. For more information see:
recyclethis.info.
Contact information and product
documentation
For contact information or to download the latest product
documentation, visit firesecurityproducts.com.
Product warnings and disclaimers
THESE PRODUCTS ARE INTENDED FOR SALE TO AND
INSTALLATION BY QUALIFIED PROFESSIONALS.
CARRIER FIRE & SECURITY B.V. CANNOT PROVIDE ANY
ASSURANCE THAT ANY PERSON OR ENTITY BUYING ITS
PRODUCTS, INCLUDING ANY "AUTHORIZED DEALER" OR
"AUTHORIZED RESELLER", IS PROPERLY TRAINED OR
EXPERIENCED TO CORRECTLY INSTALL FIRE AND
SECURITY RELATED PRODUCTS.
For more information on warranty disclaimers
and product safety information, please check
https://firesecurityproducts.com/policy/product-
warning/ or scan the QR code:
P/N 10-5151-501-108-03 • ISS 06APR23
Publicité
