Publicité
5.2 Cleaning the fine metal filter
(1) Press and hold the button at the front end of the filter cover to remove the filter cover from the body.
(2) Unscrew and remove the cap located at the top of the body to access the metal filter screen.
(3) Thoroughly clean the metal filter screen removing all debris.
(4) Replace the filter cover and reattach the filter cover to the body.
5.3 Battery replacement
NOTE: Please contact an authorized repair center to replace the battery.
Follow the steps below to replace the battery.
1.
Maintenance and storage
The battery discharges during storage. Make sure the robot is fully charged before storing the cleaner.
1.
When the cleaner is not in use, charge the battery every three months.
2.
•Be sure to unplug the charger from the GFCI electrical outlet and from the cleaner during storage.
•Remove the filters from the cleaner during storage. Clean the filters prior to storing them.
•Make sure all water is removed from the cleaner prior to storing it.
•Use a wet cloth to clean and dry the cleaner and its accessories.
•Store in a well-ventilated location away from sunlight, heat, fire sources, pool chemicals and children.
•Store in temperatures between 10 º C - 25 º C (50 º F - 77 º F). Note: higher temperatures may shorten the
life of the battery.
3.
2.
7
4.
5.
Publicité
