Publicité
3.
Power On and Turbo speed mode
Press and hold the power button down on the cleaner for 2-3 seconds. If the
3.1
"green" indicator light remains on, the cleaner is on . Initially, the cleaner is in
the "low-speed mode".
Press the power button again, a "blue" indicator light appears, and the cleaner ON/OFF
3.2
is in the "high speed mode". In high-speed mode, the cleaner can vacuum large
and small debris to include sand, dead algae and other sediment.
3.3
When you press the power button a third time, the indicator lights are off and
the cleaner itself is turned off.
Note:
The high and low speed mode of the
cleaner is switched from "low speed
mode" to "high speed mode",If you
want to switch from "high speed mode"
to "low speed mode", you need to shut
down and operate 3.1 again.
4. When to use the cartridge filter ?
The cartridge filter is used to collect fine dust, sand, dead
algae and other small debris; The cartridge filter is not
necessary if your vacuuming large debris such as leaves,
acorns or other large items.
Back filter
5
Indicator light
Cartridge filter
Publicité
