Publicité
ENGLISH
1. BEFORE USE
-
This appliance is packaged in a way as to protect it during transport. Take the appliance
out of its box and remove all packaging materials. You can keep the original box and
other packaging elements in a safe place to prevent damage to the device if you need
to transport it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
-
Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
-
Do not remove the serial number of the appliance in order to keep a correct traceability of
it in case of assistance.
Box content
-
Electric foot warmer
-
Controller
-
Instruction manual
NOTE:
The graphics in this manual are schematic representations and may not exactly match the
device.
2. OPERATION
1. To use the electric foot warmer, plug it into a mains socket.
2. To switch it on, select the highest temperature (level 3). After 15 minutes of operation, you
can adjust the temperature to the desired level.
NOTE: if you are going to use the electric foot warmer for a long time, select a medium
temperature (level 2).
3. To switch it off, select level 0 and unplug it from the power socket.
NOTE: the controller has a small display in which the selected temperature level is shown.
Temperature levels
Level 0 = Off
Level 1 = Low power
Level 2 = Medium power
Level 3 = High power
48
HEATCONFORT FOOTWARMER
-
It will take approximately 15 minutes for the appliance to reach the desired temperature. If,
when you touch the electric foot warmer with your hand, you feel that the temperature is
adequate, it may be too high for your feet.
-
The first time it is used, the electric foot warmer gives off a certain smell. This smell is
completely normal. However, make sure to air the electric foot warmer after the first use.
-
It features a safety system to prevent overheating.
-
Unplug the appliance when not in use.
Auto switch-off
The electric foot warmer will automatically switch off after 90 minutes of operation. If you
wish to use it again, turn the controller to the off position and wait for 5-10 minutes. After this
time, you can select the desired power setting again.
3. CLEANING AND MAINTENANCE
-
The inner cover of the electric foot warmer should be washed; this can be done either by
hand or machine.
-
The outside of the electric foot warmer must not come into contact with water.
NOTE: always use the electric foot warmer with the inner cover to prevent soiling or damage
to the appliance.
Storage
-
Let the appliance cool down completely before storing it.
-
Do not place any objects on the electric foot warmer when it is stored to prevent damage.
-
The appliance and its packaging must be kept out of the reach of children.
-
Always store the electric foot warmer in a dry place away from other heat sources.
4. TECHNICAL SPECIFICATIONS
Product reference: EU01_100653
Product: HeatConfort FootWarmer
Power: 100 W
Voltage: 220-240 V~
Frequency: 50/60 Hz
Technical specifications may change without prior notification to improve product quality.
Made in China | Designed in Spain
ENGLISH
49
HEATCONFORT FOOTWARMER
Publicité
