Publicité
lifting or unplugging the power tool. Keep the cable away
from heat, oil, sharp edges or moving parts.
E. When operating a power tool outdoors, use an extension
lead suitable for outdoor use.
F. If the use of a tool in a wet location is unavoidable, use a
power supply protected by a residual current device (RCD).
Personal safety
3.
Be alert, watch what you are doing and use common sense
A.
when operating a power tool. Do not use a power tool when
you are tired or under the influence of drugs, alcohol or
medication.
B.
Wear personal protective equipment. Wear eye protection
at all times.
C.
Avoid accidental start-up. Make sure the switch is in Off
position before you connect the tool to a power source and/
or battery, pick it up or transport it.
D.
Remove any keys or tools before starting the power tool.
E.
Do not exert too much force when using the tool. Keep your
feet firmly on the ground and maintain your balance at all
times.
F.
Wear appropriate clothes. Do not wear loose clothing or
jewellery. Keep your hair and clothing away from moving
parts.
G.
If devices are provided for the connection of dust extraction
and collection, ensure that they are connected and used
correctly.
The confidence gained from frequent use of tools should
H.
not be a reason for ignoring general security principles.
4.
Use and care of the power tool
A. Do not force the power tool. Use the correct power tool for
every type of use.
B. Do not use the power tool if the switch does not allow to
10
POWERDRILL 850 EASYADJUST
switch from "on" to "off" and vice versa.
C. Unplug the plug from the power source and/or remove
the battery, if possible, before making any adjustments,
changing accessories, or storing the power tool.
D. Keep idle power tools out of the reach of children and do
not allow people unfamiliar with the power tool or these
instructions to operate it.
E. Maintain
power tools
misalignment or binding of moving parts, breakage of parts,
and other conditions that may affect the operation of power
tools. Power tools must be repaired before use if damaged.
F. Keep cutting tools sharp and clean.
G. Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into account the
working conditions and the work to be performed.
H. Keep handles and gripping surfaces dry, clean and free of oil
and grease.
5.
Maintenance
Have your power tool serviced by a qualified repair service
6.
using only identical replacement parts.
It is recommended that you wear ear protection.
WARNINGS:
- Vibration and noise emissions during actual use of the power
tool may differ from the total declared value depending on
the way the tool is used, especially depending on the type of
workpiece being worked on.
- It is necessary to identify safety measures to protect the
operator that are based on an estimation of exposure under
actual conditions of use (taking into account all parts of
the manoeuvring cycle, such as the times when the tool is
de-energised and when it is idle, as well as the trigger pull
and
accessories.
Check
POWERDRILL 850 EASYADJUST
for
11
Publicité
