Cleaning - Honeywell TrueDRY DR65 Guide D'installation

Cleaning

On an annual basis, maintenance is required to ensure TrueDRY runs at peak efficiency.
Unplug TrueDRY DR65 before beginning
service. Press down on the quick-
1
release button and lift the duct collar.
Remove filter (50049537-005) and
replace with new filter.
3
TrueDry DR65 Dehumidification System 69-2089EFS—12
Remove duct collar to access filter.
2
Check the drain connection and drain
line to ensure it is clear of debris and
4
sludge. Ensure all hose connections
are secure once maintenance of the
drain lines is complete.
When service is complete, initiate a
call for dehumidification and check
5
that the compressor and fan activate.
If using the VisionPRO IAQ or TrueIAQ
controls, reset maintenance remind-
ers.
11