Cleaning - Honeywell DR65A3000 Guide D'installation

Cleaning

On an annual basis, perform the following maintenance requirement to ensure the dehumidifier runs at peak
efficiency.
Unplug the dehumidifier before begin-
1
ning service. Remove magnetic access
panel to access the filter.
Check the drain connection and drain
3
line to ensure it is clear of debris and
sludge. Ensure all hose connections
are secure once maintenance of the
drain lines is complete.
DR65A3000 Dehumidification System 33-00297EFS—01
Remove filter and replace with new fil-
2
ter. Reinstall magnetic access panel.
When service is complete, initiate a
4 call for dehumidification and check
that the compressor and fan activate.
If using the VisionPRO IAQ or TrueIAQ
controls, reset maintenance remind-
ers.
11