Publicité
Cable adjustment
Both cables can be adjusted.
The stop cable can be adjusted at the engine. The cable for the self-propelling function
can be adjusted using the cable near the top handle.
Height adjustment
The lawn mower comes with central height adjustment.
Use the handle near the right rear wheel to adjust the cutting height.
Start and stop of engine
REMEMBER: Always check engine oil before start!
Oil level must be between min. and. max on the oil stick.
Fill with SAE-30 oil.
Use only unleaded Octane 95 fuel in the engine. Never fill up the tank completely.
Pump the primer (A) according to the scheme
below :
Temperature
> 0° C
> 0° - 10° C
> 10° C
Put the throttle control to maximum
Pull the handle (B), which loosens the knife brake,
towards the handle and pull the starting cord.
Let the starting cord carefully return to the engine.
If necessary, reduce the throttle a bit after engine starts.
Pull the handle (C) up to activate the self-propelling
function.
The handle (B) must be pulled towards the steering
handle while using the machine. When the handle is
released, the engine (and the knife) stops in 5 seconds.
Push
2-3
1-2
0-1
B
24
A
C
Publicité
