Publicité
BMW v2
U s e r m a n u a l
To facilitate the Focal-JMlab warranty,
it is now possible to register your product online at: www.focal.com/warranty
Thank you for purchasing a Focal product. Welcome to our High-Fidelity world. Innovation, tradition, excellence and pleasure
are our values; our one and only aim is to bring you a sound that is rich, pure and true. To get the most out of your product, we
recommend that you read the instructions in this booklet, then store it in a safe place to refer to in the future.
For your safety, follow the assembly instructions provided in this user manual.
Equipment required
Important recommendations
This speaker driver has been designed to be fitted in the factory location. Check that there is sufficient space between the
speaker driver and the protective grille.
• Keep the speaker driver clear of any metal shavings and dust particles during the cutting process.
• Clean thoroughly before fitting the speaker driver.
• Ensure that there is nothing covering the grille, as this could damage the speaker driver.
• For the electrical disconnection, use the connector. Do not pull on the wires.
• Unclipping and reclipping the various parts must be done carefully.
• Excessive force may damage them.
Product positioning
The speaker driver has been designed to deliver the most faithful sound reproduction for any style of music. Nonetheless, a
few simple rules should be followed to optimise their performance and to guarantee good tonal balance and a realistic sound
image. We recommend placing the speaker drivers from the kit in the dedicated OEM locations (see illustrations).
Installation
• 1. Identify the location of the speaker driver within the vehicle.
• 2. Carefully disconnect and disassemble the original speaker driver.
• 3. Fit the Focal speaker driver into the vehicle's factory locations then connect it.
Installation details may vary depending on the model. We recommend watching our online assembly tutorials. To improve
the performance of your system and eliminate parasitic sounds, we advise you to use the Focal B.A.M. acoustic insulation kit.
Focal.
SPECIAL PRECAUTIONS
Door trims
Once the door trim has been removed, be sure to place it on a protective surface to avoid damaging it or the cables.
Maintenance
To look after the speaker drivers, simply dust using a dry cloth. If the grille is marked, use a damp cloth. Never use solvents,
detergents, alcohol or corrosive products, scrapers or scouring utensils to clean the surface of the speaker drivers.
For the purposes of improvement or to take into account any legal or regulatory changes, FOCAL-JMLab reserves the right to modify the tech-
nical specifications of its products without prior notice. Where required, any images shown are for illustrative purposes only, and may differ
Torx T20
slightly from the products sold.
14 14
Publicité
