Publicité
Tip: Mount the Z21
Mount the Z21
Z21
Connecting the Z21
®
Switching tracks or dry reed contact
The simplest form of the occupied detector is the use of dry reed contacts or switching tracks that are
earth-switched. A generation of an occupied message is only possible if a2,2kohm resistor (not included)
is activated between the detector input and the switching element. Should the resistance be too low, the
track voltages is burdened unnecessarily or the module or resistance respectively are damaged.
- detector X16 using half round head screws, e.g. 3 x 30 mm.
- detector X16 using half round head screws, e.g. 3 x 30 mm.
®
®
- Detector X16 to the Track System
®
17
Publicité
