Publicité
INSTALLATION STEPS
Handrail Installation Instructions
1. Please find the hole on one side of the frame tube (see picture 1, then remove the two foot caps
(see picture 2)
2. Please connect the bottom of the stabilizer to the rod (picture 3), and install the rod to each side
of the leg. Then reinstall the foot cap.
3. Now attach the connector (picture 4-5) to the bottom of the handle (picture 6) with the two long
screws.
4. find the top T-bar (pic 7) and adjust the bar and install it as shown. Now we will install the T bar
to the top of handle
5. Connect the installed T bar and the telescopic rod with Plum plastic screw to fix.(Figure 8)
6.Install the light strip through the fixed space on the back of the jumping step.(Figure 9) Use three
AA batteries。
8
Publicité
