Publicité
Clock Basics
(The clock system is 12-hours.)
11
Initial Time Setting
The DISP[D] button is inoperative while Scan plays in CD or CD
Changer. Cancel Scan plays before using the DISP[D] button.
0 Press DISP[D]. "ADJ" is displayed.
0 Press and hold DISP[D] again for
more than 2 seconds. "12" blinks indi¬
cating the time setting mode is acti¬
vated.
®To set hours, press [> TUNE] or
[< TUNE].
0 Press DISP[D] again for minute set¬
ting.
©To set minutes, press [> TUNE] or
[< TUNE].
Hold [> TUNE] or [< TUNE] to
change numbers rapidly.
©When you have set the time, press
DISP[D].
Resetting the Time
When you want to reset the time, press and hold DISP[D] for
more than 2 seconds to activate the time setting mode. Then, re¬
peat steps (3) to (6) above.
Selecting the Clock Display
Press DISP[D] for clock display.
Press DtSP[D] once again, and the clock display disappears.
In Tuner Mode
Presets
*—*
Clock
In CD Mode
No Display (Clock Off)
<—*
Clock
When power is turned off while the time is displayed, the
clock mode remains on. When the [PWR] is pressed again,
the system is completely off.
Note: Before you leave your car that has no ACC, be sure
to switch power off.
CQ-DFX77/DFX55/DF66/DF44EUC
17
Publicité
