Publicité
Installation Guide
(continued)
□ Installation Procedures
1. Secure the Mounting Collar (i).
Insert Mounting Collar 0 into the car's dashboard, and bend mounting tabs out with a screwdriver.
2. Secure the rear of the unit.
a) Check the electrical connection by referring to this operating instructions.
b) Connect the Mounting Bolt (5), using a suitable wrench.
c) Insert the unit into Mounting Collar 0 and push it in until "click" is heard.
d) Secure the rear of the unit to the car by either of the two recommended methods.
■ Using the Rear Support Strap ®
Affix one end of the Rear Support Strap (3) to the rear of the unit, and the other end to the Fire Wall of
Car, or some other metallic area.
■ Using the Rubber Cushion (Optional)
(If there is an existing Rear Support Bracket on the Fire Wall of Car.)
Cover Mounting Bolt (|) on the rear of the unit with Rubber Cushion (Optional), and mount it into the
existing Rear Support Bracket.
26
CQ-DFX77/DFX55/DF66/DF44EUC
Publicité
