Publicité
N
3. a) Plug the Power Connector ®.
b) Install the Trim plate ®.
4. After installation reconnect the
negative (—) battery terminal.
To Remove the Unit
a) Remove the removable face plate.
(* Page 28.)
b) Remove the trim plate with a screwdriver as
shown in the figure.
H
21
c) Pull out the unit while pushing two lock levers using screwdriver in the following order.
Fig.1,2)
d) Remove the unit pulling with both hands.
Fig.3)
Fig. 1
Lock Lever
Fig.3
CQ-DFX77/DFX55/DF66/DF44EUC
27
Publicité
