Publicité
Applications
The RPLS730B / RPLS731B programmable wall switch has been designed to control
lightings and motors:
Load type
Resistive load
Inductive load
Motor
Installation
NOTE: This switch cannot be used if there are not at least 2 white wires joined by a
connector inside the electrical box.
1)
Cut power at the circuit breaker to avoid electric shock.
2)
Remove the existing switch.
3)
Install the new switch as shown in the diagram below.
4)
Apply power at the circuit breaker.
120 VAC (line)
RPLS730B / RPLS731B
Maximum load
2400 W
(20 A @ 120 V)
2400 W
(20 A @ 120 V)
1 hp
black (line)
blue (load)
Installation and User Guide
Programmable Wall Switch
Examples
• incandescent lights
• halogen lights
• block heater
• fluorescent lights
• compact fluorescent lights (CFL)
• sodium lamps
• electronic ballasts
• pool filter pumps
• fans
white (neutral)
1/4
Load
Publicité
