IMPORTANT SAFETY INSTRUCTIONS
WHEN USING ELECTRICAL PRODUCTS, BASIC SAFETY PRECAUTIONS
SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING:
READ AND SAVE THESE INSTRUCTIONS.
DANGER
– TO REDUCE THE RISK OF ELECTRIC SHOCK:
• Always place humidifier on a firm, flat surface. A waterproof mat or pad is
recommended for use under the humidifier. Never place it on a rug or carpet, or
on a finished floor that may be damaged by exposure to water or moisture.
• Always unplug the unit from the electrical outlet immediately after using and
before cleaning.
• DO NOT reach for a unit that has fallen into water. Unplug it immediately.
• DO NOT place or store the unit where it can fall or be pulled into a tub or sink.
• DO NOT place or drop into water or other liquids.
• DO NOT use water above 86°F.
WARNING
OR INJURY TO PERSONS:
• Use this unit only for its intended use as described in this manual. Do not use
attachments not recommended by Homedics; specifically, any attachments not
provided with this unit.
• NEVER drop or insert any object into any opening.
• NEVER operate the appliance if it has a damaged cord or plug, if it is not
working properly, if it has been dropped or damaged, or dropped into water.
Return the appliance to a Homedics Service Center for examination and repair.
• Always unplug the unit when filling or moving the unit.
• Ensure that your hands are dry when operating the controls or removing the plug.
• NEVER use the humidifier in an environment where explosive gases are present.
• DO NOT place the humidifier near heat sources, such as a stove, and do not
expose the humidifier to direct sunlight.
• DO NOT carry this unit by the power cord or use the power cord as a handle.
• To disconnect, turn all controls to the off position, then remove the plug from the outlet.
• DO NOT use any other AC Adapter than what is supplied with the product. Use
of any other AC adapter may damage the product and may increase risk of harm to user
or property. Only AC Adapter bearing the Part # PP-UHECMF57ADP should be used.
• To reduce the risk of fire, electric shock or injury to persons, do not use
replacement parts that have not been recommended by the manufacturer (e.g.
parts made at home using a 3D printer).
– TO REDUCE THE RISK OF BURNS, FIRE, ELECTRIC SHOCK,
2