Publicité
OPERATING INSTRUCTION
EN
INSTRUCTION MANUAL
CORDLESS KETTLE WITH TEMPERATURE CONTROL PANEL C550
CORDLESS KETTLE WITH TEMPERATURE CONTROL PANELC550
• GENERAL DESCRIPTION
1.
Spout + filter
2.
Lid
3.
Button to open the lid
4.
Handle
5.
Tank
6.
Base
7.
On/off switch
8.
Switch / indicator –
keep warm function
9.
Function keys
10. Stored programmes
11. Display
• TECHNICAL DATA
−
power: 1850 - 2200W
−
mains voltage:
220-240V~ 50/60Hz
−
capacity: 1.7 litre
•
INTENDED USE
The C550 wireless kettle is intended for boiling water. It is fitted with the function of temperature
control and hold. The capacity of the kettle allows to boil 0.5–1.7 l of water.
and minimum (MIN) allowable water levels are marked inside the tank
• USE
NOTES. Before using the jug for the first time, boil the water 2-3 times and pour out.
−
All setting changes are confirmed by a beep.
−
Place the base of the appliance (6) on a flat, stable and dry surface. There is space in the base
for the excess cable. It is important that the cable is routed out of the base (6) through the
special groove so that the unit stands firmly.
−
Before inserting the plug into the socket, make sure that the data on the unit's rating plate
corresponds to the mains parameters.
−
The appliance should be filled when the lid (2) is opened. The lid is opened using the button
(3). Close the lid by pressing lightly until it audibly snaps shut.
−
Do not fill the kettle when standing on the base.
−
When the kettle is placed on the base connected to the power supply, the indicators (7-11)
will be illuminated. If no operation is performed within 1 minute, the kettle will
automatically enter standby mode - only the button (7) will be illuminated.
−
If the kettle is in standby mode, press button (7) to start operation.
−
After pressing button (7), the kettle will boil the water to 100°C.
−
Once the water has been heated to the set temperature, the illuminated indicators turn
off after approximately 30 seconds.
Temperature control
−
The kettle allows the water to be heated to the set temperature.
−
There are 5 preset programs (temperatures):
40°C, 70°C, 80°C, 90°C i 100°C.
−
Manually, the temperature can be selected from 40°C - 95°C (step in 5°C increments).
−
The unit allows you to maintain the temperature for any selected value.
Note: Removing the kettle from the base erases the settings.
10
2
1
11
10
9
8
7
The maximum (MAX)
(5).
3
4
5
6
Publicité
