Publicité
IMPORTANT:
Please study them and learn their meaning for critical information to operate the tool safely.
SYMBol
DeSCripTion
V
Volts
a
amperes
hz
hertz
w
watts
no load speed
kg
Kilograms
h
hours
.../min
Per minute
SPECIFIC SAFETY RULES FOR CORDLESS JIG SAWS
WARNING:
familiarity with product (gained from repeated use)
replace strict adherence to product safety rules. if you
use this tool unsafely or incorrectly, you can suffer
serious personal injury!
WARNING:
gripping surfaces when performing an operation where
cutting tools may contact hidden wiring or its own cord.
Contact with a "live" wire will make exposed metal parts
of the tool "live" and shock the operator!
• Before you begin cutting, especially during
demolition, check for potential hazards such
as water, power, and communications lines.
• Use clamps or another practical way to
secure and support the workpiece to a
stable platform.
• Avoid cutting nails, inspect workpiece for any nails
and remove them before operation.
• Check for the proper clearance beyond the
workpiece before cutting so that the blade will not strike
the floor, work bench, or other objects.
• Make sure the blade is NOT contacting the
workpiece before the switch is turned on.
• Do not leave the tool running. turn on the tool
only while operator controlled.
SYMBOLS
some of the following symbols may be used on your product and appear throughout the manual.
SYMBol
DeSCripTion
revolutions per
rPM
minute
strokes per
sPM
minute
oscillations per
oPM
minute
alternating
current
or a.C.
Direct current
or D.C.
Do not use in
wet conditions
battery cannot
exceed 59° C
Do not put
battery in fire
Do not let comfort or
hold the tool by insulated
SYMBol
warning symbol. Precautions that involve
your safety
to reduce the risk of injury, read operator's
Manual before using this product
wear safety glasses, ear protection and
respiratory protection
Do not dispose with household waste
Do not touch the running blade
Class ii Double insulated construction
this symbol designates that this product is
listed with u.s. and Canada requirements
by etl testing laboratories, inc.
• Do not touch the blade or the workpiece
immediately after operation. it may be
extremely hot and could burn your skin.
• Keep hands away from the moving parts.
• Always disconnect battery pack from tool
or place the switch in the locked or off position before
any assembly, adjustments or changing of accessories.
following this instruction will reduce the risk of serious
personal injury.
• Do not place battery tools or their batteries
near fire or heat. this will reduce the risk of
explosion and possibly personal injury.
• Never use a battery which has been
dropped or received a sharp blow. a damaged
battery is subject to explosion. Properly dispose of a
dropped or damaged battery immediately.
• Use designated battery packs (Genesis™
- Model GLAB2020B or GLAB2040B) and
charger for this tool. use of any other batteries
may result in a risk of fire.
WARNING:
warnings, cautions and operating instructions before
using this equipment. failure to follow all instructions
listed below may result in electric shock, fire and/or
serious personal injury.
ENGLISH
DeSCripTion
read and understand all
5
Publicité
