Publicité
Install Instruction
Door reversal (Optional)
Based on the location where you plan to use your refrigerator, you may find it more convenient
to reverse the position of the door.
CAUTION
To avoid injury to yourself or your property, we recommend that someone assist you during the door reversal
process.
Make sure that your refrigerator is unplugged and empty.
>
Have someone available to assist you in the process.
>
Keep all of the parts you remove to reuse them later.
>
sTEP:
1. Power off the refrigerator, and remove all objects from the door trays.
2. Dismantle upper hinge cover, upper hinge and hole cap of the other side, remove the freezer
door.
Upper Hinge Cover
Upper Hinge
Sleeve Pipe
Hole Cap
3. Dismantle the middle hinge, the screw hole caps and remove the refrigerating door.
4. Dismantle the bottom hinge, hole caps and screws,Install the bottom hinge shaft and adjust
foot on other side of the bottom hinge, then install the hinge on the other side.
5. Dismantle the screw, sleeve pipe and stopper from the refrigerating door and freezer door,
and the support on the lower cover of the refrigerating door is also removed. Then install them
on the other side of the doors in order.
6. Exchange the position of sleeve pipe and hole cap at the top cover of refrigerating door, and
install the upper hinge sleeve on the freezer door to the hole on the otherside of axis sleeve.
Screw Cap
Screw
hole cap
Hole Cap
Screw
Screw Cover
Screw
Shaft
7
sleeve pipe
stopper
stopper screw
EN
Publicité
