Publicité
E
Attach the wheel
1.Turn the bottom of the toy car up as above picture show.
2.Push the wheel to the back axle and make the wheel connect well with the
motor.
3.Put a gasket to the other side of the wheel.
4.Tighten the wheel with a M8 nut.
5.Insert the Wheels cover.
6.The other wheel to be installed as the same way.
1.Turn the bottom of the toy car up as above picture show.
2.Slide the gasket into the front axle.
3.Push the wheel to the front axle.
4.Put a gasket to the other side of the wheel.
5.Tighten the wheel with a M8 nut.
6.Insert the Wheels cover.
7.The other wheel to be installed as the same way.
5
Publicité
