Publicité
F
2.4G Remote Control Instructions
Step 1: The Remote Controller is loaded with two AAA batteries (battery prepared by
yourself).
Step 2: Turn off the power switch on the vehicle.
Step 3: Hold down "▲"&"▼" keys for 3 seconds start match code, the first LED flicker.
Now turn on the vehicle power switch. The red indicator lights stop flashing,
and the code is successful.
1. Keys caption:"S" set up speed,1 led lit up is low speed, 2 leds lit up is medium
speed, 3 leds lit up is high speed.
2. "▲" Forward, "▼" Back, " ◄ " Left, " ► " Right, Press "P"key hold the brake, ALL
LED flicker.
3. Remote control button automatically open, without touching about 2 minutes, it will
shutdown automatically.
NOTE:
● Leave the remote controller idling for about 10 seconds, it will shut down
automatically.
● Rebuild connection when you replace the batteries of the remote controller.
9
Use the Remote controller (IF EQUIPPED)
Publicité
