Your New Oven; Control Panel; Function And Temperature Selector; Burner Knob - Blaupunkt 5HC110.0 Notice D'utilisation

Your new oven

Here you will learn about your new oven. The control panel and
the individual operating controls are explained. You will find
information on the cooking compartment and the accessories.

Control panel

Here you can see an overview of the control panel. The design
depends on the respective appliance model.
Explanations
1

Function and temperature selector

2 Selector switch
Function and temperature selector
Use the function and temperature selector to set the type of
heating and temperature.
Temperature
Ú
50-250
Function
\
% 50-250
#

Burner knob

You can use the four burner knobs to adjust the heat setting of
the hotplates.
The Positions
Zero position
Û
1-9 Heat settings
Activate
æ
Activate
ð
When you switch on the cooker, the indicator lamp lights up.
34
Function
Off position. Oven not hot.
Temperature is specified in ºC.
Oven light
Top/bottom heating
Top heating
Function
Cooker switched off.
1 = lowest setting
9 = highest setting
Switches on the extended cooking
zone
Switches on the dual-circuit hot-
plate

Cooking compartment

The oven light is located in the cooking compartment. A cooling
fan protects the oven from overheating.
Oven light
During oven operation, the oven light is on. You can switch on
the oven light without putting the oven into operation by setting
the function and temperature selector to
Cooling fan
The cooling fan switches on and off as required. The hot air
escapes above the door.
So that the cooking compartment cools down more quickly
after operation, the cooling fan continues to run for a certain
period afterwards.
Caution!
do not cover the ventilation slots. Otherwise the oven will
overheat.
.
\