3.4 Remote Control
1
Switch the soundbar between ON and
STANDBY mode.
2 SURR
Switch the surround PURE/PRO/OFF. Press
and hold to adjust surround sound level.
3 VOL + /VOL −
Increase/decrease the volume level.
4 BASS + / −
Adjust bass level.
5
(MUTE)
Mute or resume the sound.
6
button
Select the play function.
7
Select the Bluetooth mode.
Press and hold to activate the pairing
function in Bluetooth mode or disconnect
the existing paired Bluetooth device.
8 EQ
Select a preset sound effect.
9
/
Skip to previous/next track in
Bluetooth/USB mode.
10
Play/pause/resume playback in Bluetooth/
USB mode. Press and hold the button for 3s
to enter setup menu.
11 DIMMER + / −
Adjust LED brightness.
12 TREBLE + / −
Adjust treble level.
4. Preparations
4.1 Prepare the Remote Control
The provided Remote Control allows the soundbar
to be operated from a distance.
Even if the Remote Control is operated within
•
the effective range 19.7 feet (6m), remote
control operation may be impossible if there
are any obstacles between the soundbar and
the remote control.
If the Remote Control is operated near other
•
products which generate infrared rays, or
if other remote control devices using infra-
red rays are used near the soundbar, it may
operate incorrectly. Conversely, the other
products may operate incorrectly.
4.2 Replace the Remote Control Battery
1
Press and slide the back cover to open the
battery compartment of the remote control.
2
Insert two AAA size batteries. Make sure the (+)
and (–) ends of the batteries match the (+) and
(–) ends indicated in the battery compartment.
3
Close the battery compartment cover.
Precautions Concerning Batteries
•
Be sure to insert the batteries with correct
positive " " and negative " " polarities.
•
Use batteries of the same type. Never use
different types of batteries together.
•
Either rechargeable or non-rechargeable
batteries can be used. Refer to the
precautions on their labels.
•
Be aware of your fingernails when removing
the battery cover and the battery.
•
Do not drop the remote control.
•
Do not allow anything to impact the remote
control.
•
Do not spill water or any liquid on the remote
control.
•
Do not place the remote control on a wet
object.
•
Do not place the remote control under direct
sunlight or near sources of excessive heat.
•
Remove the battery from the remote control
when not in use for a long period of time,
as corrosion or battery leakage may occur
and result in physical injury, and/or property
damage, and/or fire.
•
Do not use any batteries other than those
specified.
•
Do not mix new batteries with old ones.
•
Never recharge a battery unless it is
confirmed to be a rechargeable type.
EN
FR
10
ES
11
12
7