Publicité
8. Basic Operation
8.1 Standby/ON
It will automatically turn on when the power cord
is connected.
•
Press the
button to switch the soundbar
STANDBY mode.
•
Disconnect the mains plug from the mains
socket if you want to switch the soundbar
OFF completely.
8.2 Auto-Standby / Auto-Wake Feature
[Auto-Standby] During Auto Standby On mode,
the soundbar would standby automatically when
no audio is detected for 15 minutes. For example,
this would happen when pausing playback, or
should the soundbar be left on accidentally.
[Auto-Wake] If a TV or an external device is
connected (AUX / OPTICAL / HDMI eARC mode),
the unit will switch on automatically when the TV
or the external device is switched on.
To disable this feature, please follow the steps
below:
1.
During ON mode, press and hold the
button for 3 seconds to open the menu.
-
The unit's display will show "MENU".
2.
Press the
button 6 times in succession:
the display shows: Auto Wake [ON / OFF].
or Press the
button 7 times in succession:
the display shows: Auto Standby [ON / OFF].
3.
Select the content with VOL+ / buttons on
the remote control, and then press the
button to confirm your selection and exit the
settings.
•
Repeating these steps will toggle the feature
"ON" and "OFF".
8.3 Select Modes
Press the
(SOURCE) button repeatedly on the
soundbar or on the remote control to select the
AUX, , OPTICAL, HDMI eARC/ARC and USB
mode. The selected mode will show on the display.
Display
Mode
arc
HDMI ARC
e-ARC
HDMI eARC
Opt
OPTICAL
12
BT
Bluetooth
BT IN
• Connected
NO BT
• Not Connected
AUX
AUX
U5B
USB
NO U5B
No USB connected
8.4 Adjust the Volume
Press the VOL + / − buttons on the soundbar
•
or on the remote control to adjust the
volume.
•
If you wish to turn the sound off, press the
(MUTE) button on the remote control. Press
the
(MUTE) button again or press the
VOL + buttons to resume normal listening.
8.5 Turn the Surround PURE/PRO/OFF
•
Press the SURR button on the remote control
to switch the surround PURE/PRO/OFF.
8.6 Adjust the Bass/Treble
Press the BASS + / − buttons on the remote
•
control to adjust bass level.
Press the TREBLE + / − buttons on the
•
remote control to adjust treble level.
8.7 Select Equalizer (EQ) Effect
•
While playing, press the EQ button on the
remote control to select desired preset
equalizers: MOVIE, MUSIC, GAME, NEWS,
SPORT, NIGHT, AI.
8.8 Adjust the Brightness
Press the DIMMER + / − buttons on the
•
remote control to select brightness level.
8.9 Adjust the Surround's Volume
1
When the surround speaker is connected,
press and hold the SURR button for 3
seconds, the display shows "SUR-0"
2
Then press VOL+ / VOL- buttons to increase
or decrease the surround speaker volume
(SUR +5~SUR -5).
•
After about 3 seconds, the unit will exit from
surround volume setting. The display will
show the current selected mode. You may
now press the VOL+ / - buttons to adjust
volume.
Publicité
