Publicité
STEP 3. TURN ON THE REMOTE AND COLLAR
How To Turn ON/OFF the Remote?
1. To turn on the remote, press and hold the ON/OFF button.
2. The screen will light up and display current channel data and battery level. If the
screen doesn't light up, charge the remote.
3. To turn off the remote, press and hold the ON/OFF button for over 2 seconds.
How To Turn On the Collar?
1. To turn on the collar, press the ON/OFF button.
2. The LED light on the collar will turn green. In standard mode, the Green LED will
flash every 4 seconds indicating that the collar is on and ready to receive a signal
from the remote.
3. To turn off the collar, press and hold the ON/OFF button for over 2 seconds.
We strongly suggest TESTING the collar before putting it on your pet.
Before starting the training, place the collar on yourself and test it to see how it feels.
We recommend starting with the lowest setting and then moving on to higher settings
up to your personal comfort level.
1. Rotate the shock level knob, set to level 1 .
2. Place two finger over both contact points of the training collar.
3. Press and hold the Stimulation Button on the remote for 1-2 seconds. At this level,
you should feel continuous stimulation.
4. Keep going up the levels until the sensation starts to feel uncomfortable.
Continuous stimulation will go on for no more than 10 seconds.
To reactivate stimulation, release and press the button again.
*Remote Battery Life: 10 Days (Every 1 Min/Time, 4 H/Day)
*Collar Battery Life: 16 Days (Max. Level, Shock Every 1 Min/Time, 4 H/Day)
5
Publicité
